0item(s)

You have no items in your cart.

Product was successfully added to your shopping cart.

QuickJack Set Up

Setup QuickJack in Only 30 Minutes!

Once your QuickJack arrives in its boxes, you'll be about half an hour away from full lifting glory. Setup requires no special tools, bolts of drills - just a few spanners you probably have on-hand. After all, your portable car lift is made to be taken on the road, so we kept things as simple and clear-cut as possible.

1
Lay out the content of your 3 boxes

Lay out the content of your 3 boxes.

Lay our the frames, parts assembly, power unit and hoses on a clear surface, so you don't misplace or lose any parts during installation.

2
Install a few fittings and valves

Install a few fittings and valves.

The frame assembly and power unit have some fittings that need to be applied and secured using PTFE tape. Simple, Fast, Easy..

3
Pressurise air cylinders

Pressurise air cylinders.

The air cylinders need to be pressurised for the first time use and periodically over time. A hand/foot pump or air compressor will accomplish the job.

4
Set up power unit and fill with hydraulic fluid.

Set up power unit and fill with hydraulic fluid.

Ensure the power unit is connected to the case and the fittings are secure, then funnel in 2.8 litres of hydraulic oil or ATF fluid (not included).

5
Prepare quick-connect hoses

Prepare quick-connect hoses.

Thread the zero-leak quick-connect fittings with PTFE tape and wrap as directed.

6
Final checklist before lift.

Final checklist before lift.

A few final tasks remain: drain the extra packing oil, ensure the frames are lifting correctly, a final inspection and you're ready to go! Remember NEVER LIFT THE FRAMES TO THE MAX EXTENSION WHEN NOT UNDER LOAD!

One-time setup and you're ready to lift.

One-time setup and you're ready to lift.